Woodworking gifts for sale

I’ve been busy making sawdust along with some projects that would make fine Christmas gifts.  Fill out the comment form and I’ll figure shipping.

Walnut and Maple End Grain Cutting Board

Beautiful and classic look of end grain walnut and maple.

Approximate Dimensions: 16″ x 12″ x 1-1/4″

5 available, $125/each


Padauk and Maple End Grain Cutting Board

Stunning contrast between the deep red/orange padauk and the light maple.

Approximate Dimensions: 18″ x 12″ x 1-1/4″

5 available, $149/each


Walnut and Zebrawood Keepsake Box

Walnut and zebrawood were meant to be together!  They compliment each other so nicely.

Approximate Dimensions: 11″ x 6″ x 6″



Cherry Keepsake Box


This box is made entirely out of cherry.  The lid has a strip of lighter sapwood along each edge as an accent.

Approximate Dimensions: 11″ x 6″ x 6″


Maple and Cherry Keepsake Box with Hinged Lid

The maple on this box has much character – undulating grain and iridescence.  The cherry in the lid is very straight rift sawn grained with a subtle bee’s wing figure.

Approximate Dimensions: 10″ x 6″ x 7″



Cherry and Birdseye Maple Keepsake Box

This box subtle grain patterns that will show timeless beauty.

Approximate Dimensions: 7″ x 4″ x 5″



Cherry and Birdseye Maple Keepsake Box

The front of this box has a fan shaped grain pattern on it.

Approximate Dimensions: 8″ x 4″ x 5″



6-Pack Carrier

Rustic looking scorched pine 6-pack carrier with bottle opener.  Holds 12 ounce bottles.  22 ounce bomber carriers and growler carriers coming soon!

10 available, $49/each HOME BREW NOT INCLUDED!


A Wedding Gift


About a year ago, my cousin asked me if she could borrow one of my boxes to use in her wedding. She was looking for something that she could set out for people to put cards in at the reception. I showed her pictures of some of the boxes I had made and gave her dimensions. She said she liked this box best. It was one I made in a class with Frank Strazza of Homestead Heritage. I highly recommend taking a class from him if you ever get the chance.

My plan was to make her a box as a wedding gift instead of letting her borrow it. I had a few months to work on it. I had some nice figured maple in my stash. I wasn’t thrilled with the walnut I had on hand, so I went to my local supplier in search of the right wood. I wasn’t thrilled with their selection at the time. One of the guys pointed me to the Peruvian walnut. He said it is the exact same species, but because it is so wet where it grows, it comes out dark and even. I can’t remember exactly why, maybe longer air drying. Anyway, I thought that was perfect. She recently went to Machu Picchu, so that was a good tie in.

So I started milling up the wood. Life got in the way like usual. I spent more time at work than I had anticipated. Then when I was off work, there was a steady stream of family events and appointments all at about 3 hour spacings, which made it really hard to find my way into the shop. I pushed to get it done before the wedding, but no joy. I found myself half-assing things for the sake of time. I decided to just take my original box to the wedding and finish this box properly.  Crisis averted.

With time on my side, I completed the box.  Unlike the box I built with Frank, this one was not a hand tools only project.  It was a nice mix of power tools and hand tools.  One thing I did different was to cut a rabbet on the back of the box trim.  It made installing the trim incredibly easy.  Just slide the trim onto the box until it stops.  I could get all four pieces glued in place at one time.

The hinges are from Brusso. I really like the quality of their products.  Since my cousin and I are both engineers and she is an actual rocket scientist, I figured the OCD force would be strong.  I made sure the screw heads are all clocked.


The finish is several coats of lacquer, with each layer being rubbed out in between. If I had it to do over, I think I would have given the maple a coat or three of BLO before the lacquer. The walnut and maple is a strong contrast. I put a velvet lining on the bottom inside of the box. It complements the box nicely.


I finished the box in time to put in the Alaska Creative Woodworker’s 12th annual Artistry in Wood show.  Before judging, I saw the competition and there were several worthy adversaries in the box division.  I prepared myself for a poor showing.  I happened to be out of town on the day of judging, but someone sent me a photo and my jaw dropped!  I won a blue ribbon and best in division.


The show is over, now it is time to pack the box up for shipping to my cousin.  I hope she finds that it was worth the wait.